Statex Semi Automatic VTM Dispenser is to measure 0.5 ml to 1000 ml (with 0.1ml increment) of liquid accurately by measuring (ml) accuracy ±2%.


    • Two Peristaltic  pumps with a single controller; each works independently with the same volume or different volume as per selection.
    • Joint less tube from suction to delivery end.
    • Calibration software assists to calibrate the volume, if any variation due to tube ageing.
    • Provided a special cap with joint less tube fitting arrangement for easy unscrew and screwing the cap while replacing the bottle.
    • Pump speed selectable in three speeds: 60, 90, 120 rpm.
    • Filling time will be less than 1sec/tube/pump of 3mI VTM at 60 rpm.
    • 1800 Tubes per hour, (3mI VTM can be filled in 1hr with 60 Rpm, practically 4secs/tube).Cap opening, liquid filling and cap retightening will be within 4 seconds.
    • Joint less tube – Special silicone tubes with autoclavable provided to suit as per medical requirements.
    • User friendly independent foot pedal Operating system for both operators.
    • Touch screen HMI display – 4.8″.
    • Power Supply: 230V AC/50Hz, 5A.
    • Self-prime mode for easy liquid loading by using push buttons for both the pumps separately.
    • Microprocessor based stepper motor drive.
    • Counter for counting the number of tubes dispensed.
    • Provision for autoclavable comes with a nitrogen cylinder and regulator. Gas to be filled inside the dispensing tube before and after the usage of dispensing.


OPTIONAL: NIGHT SAFETY MODE, nitrogen gas autoclavable inside the tube and pump. We supply mini nitrogen cylinders and connectors. After connecting the nitrogen gas cylinder, night mode automatically refills nitrogen gas inside the tube and pump until ready to reuse the VTM. It safeguards the VTM path of the pump and tube from any contamination.

VTM Dispenser
VTM Dispenser
VTM Dispenser

VTM Dispenser Video: