Statex Semi Automatic VTM Dispenser - 600N
Statex Semi Automatic VTM Dispenser - 600N
Statex Semi-Automatic VTM Dispenser is to measure 0.5 ml to 1000 ml (with 0.1ml increment) of liquid accurately by measuring (ml) accuracy ±2%.
Two Peristaltic pumps with a single controller; works independently with the same volume or different volume as per selection.
Single tube - no joint, from suction end to delivery end.
Provided a special cap with suction tube fitting arrangement, easy to unscrew and screw the cap while replacing the bottle. Pump speed selectable in three speeds: 60, 90, 120 RPM.
Filling time will be less than 1 secs/tube/pump of 3mI VTM at 60 rpm.
Cap opening, liquid filling and cap retightening will be within 4 seconds. 4 1800 Tubes per hour, (3ml VTM can be filled in 1hr with 60 Rpm. Practically 4secs/tube).
Special silicone tubes with auto clavable and biodegradable provided to suit as per medical requirements.
User friendly foot pedal operating system by two operators independently. l• Touch screen HMI display - 4.8".
Power Supply, 230V AC/50Hz, 5A.
Self-prime mode for easy liquid loading by using push buttons for both the pumps separately.
Microprocessor based stepper motor drive. Counter for counting the number of tubes dispensed.
Provision for Auto cleavable with nitrogen gas. Gas to be filled inside the dispensing tube before and the after the usage of dispensing.
We supply Mini N2 Cylinder and regulator for above auto cleavable
Request Quote
Reach out to our dedicated support team for any inquiries or assistance. Contact us via phone, email, or our website's contact form.